Page 27 - Digimed_HS_HCS_screws_DE+EN-2021

7.0 HCS INSTRUMENTE
7.0 HCS INSTRUMENTS

7.0 HCS INSTRUMENTE 7.0 HCS INSTRUMENTS

Positionieren und Führen Positioning and guiding

Gewebeschutzhülse f. HCS 7.0 Protection sleeve f. HCS 7.0
Art. Nr. 91-005-0213-070 Ref. No. 91-005-0213-070

Hülse f. Führ.draht 2.6 mm Sleeve f. guide wire 2.6 mm
Art. Nr. 91-005-0213-070/2 Ref. No. 91-005-0213-070/2

Bohrhülse f. Ø 4.8 mm Drill sleeve f. Ø 4.8 mm
Art. Nr. 91-005-0213-070/1 Ref. No. 91-005-0213-070/1

Trokar HCS 7.0, Ø AD 2.6 mm Trocar f. HCS 7.0 OD Ø 2.6 mm
Art. Nr. 91-005-0213-070/3 Ref. No. 91-005-0213-070/3

Positionieren und Messen Positioning and measuring

Führungsdraht m. 15 mm Gewinde, Ø 2.6 mm, L. 200 mm Guide wire w. thread 15 mm, 2.6 x 200 mm
Art. Nr. 91-004-0735-020-200 Ref. No. 91-004-0735-020-200

Messlehre für HCS 4.3/7.0 mm Measuring gauge f. HCS 4.3/7.0
Art. Nr. 91-007-0026-001 Ref. No. 91-007-0026-001
Bohren und Fräsen Drilling and milling

Kanul. Bohrer HCS 7.0 vierschneidig / Spirallänge 35 mm, Drill bit Ø 4.8 w. triangle conn., cann., 4-flutes
Ø AD 4.8 + ID 2.7 mm, L. 235 mm, 3-Kant-Anschluss Ref. No. 91-007-0013-065
Art. Nr. 91-007-0013-065

Kanul. Kopfraumfräser HCS 7.0, Ø AD 7.6 + ID 2.7 mm, Countersink w. 1/4 inch conn., cann., f. HCS 7.0
L. 150 mm, mit 1/4 Zoll-Kupplung Ref. No. 91-007-0012-085
Art. Nr. 91-007-0012-085

Schrauben Screwing in

Kanül. Schraubendreherschaft m. 1/4 Zoll-Kupplung, Screwdriver shaft w. 1/4 inch conn., cann.
Hex 4.5 mm, Ø ID 2.7 mm, L. 138 mm hexagon socket 4.5 mm
Art. Nr. 91-007-0010-110 Ref. No. 91-007-0010-110

Kanül. HCS 7.0 Schraubendrehergriff m. 1/4 Zoll-Kupplung T-handle w. ratchet, w. 1/4 inch-coupl., cann.
Art. Nr. 91-013-0010-910C Ref. No. 91-013-0010-910C

Digimed Medizintechnik • Kreutzerstrasse 1 • 78573 Wurmlingen • Germany • www.digi-med.de 27